|
aim - CFD program is offered in
different variants to satisfy the exact needs of students. Along
with fundamental training, students will undergo software
training. Depending on the project and interest of students,
they can select the tool which they are going to use for there
project work. CCTech's expert CFD team will mentor the students
during there learning as well as project execution phase.
Following are the four different variants of
aim - CFD program.
Following is the
training content of different modules :
 |
Governing Equations : Derivation and interpretation of
terms
|
|
|
CFD
process flow
|
|
|
Governing Equation Discritization : Finite Difference
and Finite Volume representation |
|
|
Grid
Generation Methods |
|
|
Boundary
Conditions – Which ? Why ? How ? |
|
|
Residual, accuracy and Convergence |
|
|
Exploring GAMBIT GUI
|
|
|
Geometry
Modeling using GAMBIT |
|
|
Edge and
Face meshing using GAMBIT |
|
|
Volume
meshing using GAMBIT |
|
|
Clustering using sizing functions and boundary layer |
|
|
Mesh
quality and quality parameters |
|
|
Exploring ICEM-CFD GUI
|
|
|
Geometry
modeling using ICEM-CFD
|
|
|
Multiblock structured meshing using ICEM-CFD |
|
|
Unstructured meshing using ICEM-CFD |
|
|
Mesh
quality and quality parameters |
|
|
Mesh
editing and export |
|
|
Exploring ANSYS FLUENT GUI |
|
|
Data and
process flow in ANSYS FLUENT |
|
|
Basics
of ANSYS FLUENT Solver |
|
|
Boundary
conditions in ANSYS FLUENT |
|
|
ANSYS
FLUENT solver mathematics |
|
|
Turbulence Modeling in ANSYS FLUENT |
|
|
Solving
CHT problems using ANSYS FLUENT |
|
|
Solving
Turbo machinery problems in ANSYS FLUENT |
|
|
Post
Processing using ANSYS FLUENT |
|
|
Exploring ANSYS CFX GUI |
|
|
Data and
process flow in ANSYS CFX |
|
|
Basics
of ANSYS CFX Solver |
|
|
Boundary
conditions in ANSYS CFX |
|
|
ANSYS
CFX solver mathematics |
|
|
Turbulence Modeling in ANSYS CFX |
|
|
Solving
CHT problems using ANSYS CFX |
|
|
Solving
Turbo machinery problems in ANSYS CFX |
|
|
Post
Processing using ANSYS CFX |
|
